Automatic Steel Coil Decoiler with Expanding Mandrel Hydraulic Decoiler Sheet Metal Decoiler

Product Description

 1.Product Name: 
Automatic Steel Coil Decoiler with Expanding Mandrel Hydraulic Decoiler Sheet Metal Decoiler

 

 2.Working Flow:

1) Discharge the inner axis out of the decoiler, then insert it into the steel coil.

2) Carry the steel coil together with the inner axis to the decoiler, install the axis on the frame of decoiler.

3) Use the hand wheel, to expand the inner axis, make the axis tighten the inner diameter of steel coil.

4) Release the brake of decoiler, make the coil sheet run out.

Detailed Photos

Technique Parameters of the decoiler                        

Main frame	160mm Channel Steel to weld
Dia of shaft	95mm
Power of motor	3kw
Chain	31.75mm
Bearing	6312
Appearance size	(Length)1840mmX(Width)1000mmX(Height)1200mm
The inner coil diameter	φ450-550mm
Max outer coil diameter	φ1000mm
The max capacity	5T
Features	Types available: electric decoiler, mandrel decoiler
	Adopts hydraulic expand/loosen and hydraulic driving system
	Easy to operate
	Suitable for pre-painted coil,cold rolled coil, and galvanized coil
	To support and uncoil the steel coil
	Tenses the coil by Electric power, it is convenient for the workers to operate

                

1. Guarantee                                        
     In correct operation and maintenance, the machines are 12 months quality guarantee from time of loading, life guarantee repair; within quality guarantee period, except for failures caused by human error, spare parts will be provided freely; after the quality guarantee period, only charge the cost of the spare parts. Free technical supporting and maintenance consulting in lifetime.         
2. Installation                                        
    If necessary, we can send one technician to your factory to install the machine; you need assist our technician to get the visa and pay for the two-way flight tickets, local accommodation (at least three-star hotel with air condition), food, visa cost. And you need pay 200USD/day for technician extra. The total time will be caculated as per the time that shown on the fright tickets when our technician leaves China and arrives back to China.              
                         
  The downpipe forming machine we produce is customized according to the specific requirements of customers,such as specification and raw materials. The machine is installed and tested before leaving the factory.After receiving the machine, the customer can start production once connect wires and tubes.We randomly send instructions to tell how to operate. Of course, we also have corresponding videos for reference.Technicians Can also be sent to customer factory for guidance and training if necessary.The downpipe roll forming machine also work with elbow bending machine,which make flat pipe to curve according to construction requirement.

 

Company Profile

 

Our Clients

FAQ