| After-sales Service: | 1 Years |
|---|---|
| Warranty: | 1 Years |
| Tile Type: | Colored Steel |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Technique parameters
| (1) Processing material | aluzinc/galvanized steel/colored steel coil |
| (2) Material thickness | 0.25-0.75mm |
| (3) Effective width | according to customer's request |
| (4) Feeding width | according to customer's request |
| (5) Main motor power | 5.5 kw |
| (6) Pump power | 4 kw |
| (7) Shaft diameter | 75mm |
| (8) Forming steps | up level 13 steps wall profile; down level 13 steps for roof |
| (9) Roller material | 45# forged steel, with hard chrome plating |
| (10) Main frame | 350H steel |
| (11) Medium plate thickness | 16mm |
| (12) Control system | PLC computer control with inverter |
| (1)Forming thickness | 0.25-0.75mm |
| (2)Forming steps | Uper layer:15roll stations.75mm shaft, down layer 18 roll stations |
| (3)Hydraulic mould cutting | |
| (4)Export this kind double layer machine to many countries. | |
| (5)Delta PLC fully automatic control system | |
| (6)CE,BV,TUV,CO and other requirement available | |
4.Feeding Device
1. There are 4 rollers (three supports and one pressure) at the feeding device, which can be rotated to reduce the friction of the feeding and avoid scratches on the surface of the material.
2. There are three rows of rubber rollers at the feeding device to avoid scratches between the material and the connecting table.
3. The steel plates on both sides of the feeding device are cut by wire, and they are integrally formed to ensure the strength. The steel plate has a hollowing effect: the weight can be reduced while maintaining the same strength.
4. There are chain links in the lateral orientation device to avoid scratches on the plate, and there are nylon plates to avoid scratches on the material.
5. With a hand wheel to adjust the feeding width, making the feeding more accurate.
6. With broach, it is convenient to cut material
|
The tile making machine adopts reverse synchronous operation technology, with high degree of automation, low labor intensity, simple operation, stable equipment operation, no noise, no pollution, adjustable product specifications, and multiple uses for one machine.
|
PRODUCT DETAILS |
| PRODUCT DESCRIPTION |
|
5.main frame:
1. Large material: usually 350# or 400# h-beams are welded. Compared with other companies' frames, our company's frame is more stable and reliable. According to different requirements, sometimes we choose 500# h-beams to make large frames to improve the strength of the frame and prevent breakage during delivery.
2. The material we use is thicker than other companies' materials
3. Our frame welding is stronger
4. There are horizontal braces and diagonal braces on the large frame to prevent the large frame from being twisted during the hoisting process, to ensure that the frame is firm and stable, and to avoid damage during transportation. And there are hoisting holes or lifting ears on the big frame, which can ensure the level of everyone, which is convenient for hoisting and moving.
6.Roll Forming And Transmission Device
1.rollers thick chromed good hardness for long service time.
2. Each roller has number and with keynotes, it can fix on the shaft stablely(Under the connection of the key, the shaft drives the rollers to rotate, preventing the phenomenon that the shaft moving roller does not move.)
3.gear and double chain,stableRoll Forming And Transmission Device
7.Hydraulic Cutting Device
Blade material: Cr12,with quenched treatment
Motor power: 4 kw
Cutting tolerance: +/-1 mm
Cooling system: With fan cooling
Cutting type: Hydraulic cutting
Feature: Low noise and high performance
We use four pillars cutting system structure, it can make sure the cutting stable
8.Control system
Control system: PLC
PLC brand: Delta from Taiwan
Frequency converter brand: Delta from Taiwan
5 Encoder: Omron
Function: Automatic control the length,quantity and batch
9.Hydraulic station
1.Hydraulic station motor:5.5KW
2.Hydraulic oil:46# hydraulic oil
3.Main components:Include a set of hydraulic tank, a set of hydraulic oil pump, two hydraulic pipes. And one of electromagnetism valve
FMS machine making company is a 100% manufacturer which established since 2013. We are a leading manufacturer for steel plate coiling machinery, roll forming and automatic production lines. The mainly products are used in steel structure industry and construction industry, such as C&Z shape purlin roll forming machine, load-bearing building decking plate roll forming machine, wall and roof roll forming machine used for high-grade steel structure residences; glazed roof panels roll forming machine, ridge cap tile roll forming machine, all kinds of C and U shaped channels roll forming machine, door frames roll forming machine, roller shutter door forming machine, as well as different kinds of decoilers, bending machine, cutting machine, slitting machine and so on. We will guarantee machines good quality and innovative technology, based on our professional and experienced engineers, technicians and workers. Our roll forming machines are be designed and made according to customers' requests. We design and supply different kinds machines, which are to meet all customers' need. As well, we will design roll forming machines to be fit into one 20feet or 40feet container, which will saves shipping cost for customers.
| FAQ |
|
|
){kind=link}