High Quality Professional 3m CNC Plate Roller Sheet Metal Bending Rolling Machine

• After-sales Service: Technical Support
• Warranty: 1 Year
• Product Type: Cold Steel Roll Forming Machine
• Model NO.: Bending Machine
• Automatic Grade: Automatic
• Power Source: Electric
• Screw Design: No
• Certification: CE, ISO
• Condition: New
• Customized: Customized
• Application: House Building
• Thickness: 0.6-2mm
• Roller Materials: #45
• Shaft Diameter: 70 mm
• Driving Mode: 1 Inch Chain
• Electrical Control System: PLC
• Material of Cutting: Cr12 Mould Steel
• Transport Package: Naked with Plastic Film.
• Trademark: FMS
• Origin: China
• HS Code: 84552210
• Production Capacity: 20 Set Per Month
• Package Size: 450.00cm * 90.00cm * 150.00cm
• Package Gross Weight: 2000.000kg

Product Description

Product Description

         Hydraulic bending machine

High Quality Professional 3m CNC Plate Roller Sheet Metal Bending Rolling Machine
  1. First, connect the power supply, open the key switch on the control panel, and then press the oil pump to start, so that you can hear the sound of the oil pump. (The machine does not act at this time)
2, travel adjustment, the use of the bending machine must pay attention to adjust the travel, must be tested before bending. Bending machine die down to the bottom must ensure that there is a plate thickness clearance. Otherwise, it will cause damage to the mold and machine. The adjustment of the stroke is also electric quick adjustment and manual stomach adjustment.
3, bending groove selection, generally choose the plate thickness of 8 times the width of the notch. Such as bending 4mm sheet material, need to choose about 32 notch. 4, the rear stopper adjustment is generally electric rapid adjustment and manual fine tuning, the method is the same as the plate shearing machine. 5, step down the foot switch to start bending, bending machine and shearing machine is different, can be released at any time, loosen the foot bending machine will stop, continue to step down.

Product Parameters

Material of Shaft	70 mm 45#steel forged
Material Thickness	0.3-2 mm
Working Speed	0-15 times /min
width	4/6
Electrical Hydraulic Station Power	3 KW
Hydraulic Station Pressure	depends on requirement
Roller Station	16 Raws

Detailed Photos

 

Company Profile

Our Clients

FAQ