Roofing Sheet Steel Floor Deck Roll Forming Machine Roof Tile Making Machine

• After-sales Service: Technical Support
• Warranty: 24 Months
• Tile Type: Glazed Steel
• Model NO.: Floor Deck Roll Forming Machi
• Certification: CE, ISO
• Condition: New
• Customized: Customized
• Usage: Roof, Wall, Floor
• Transmission Method: Machinery
• Thickness: 0.7-1.2 mm
• Forming Motor Power: 15 Kw
• Hydraulic Station Motor Power: 5.5kw
• Forming Speed: 8-15m/Min
• Transport Package: Naked with Plastic Film
• Specification: 12000mm*1400mm*1200mm (approximate)
• Trademark: FMS
• Origin: China
• HS Code: 84552210
• Production Capacity: 20sets/Month
• Package Size: 1200.00cm * 140.00cm * 120.00cm
• Package Gross Weight: 4500.000kg

Product Description

              Floor Deck Roll Forming Machine
Roof Tile Steel Floor Deck Cold Roll Forming Machine is used to produce floor decks.
Floor deck is the plate which supports the floor concrete that is called the pressed steel plate,
also called the floor bearing plate and the steel bearing plate. It has three types: Open floor deck,necked floor deck,closed floor deck.

 

Detailed Photos

General Parameter

1	Item	Parameters
3	Material	Pre-painted galvanized sheet
4	Thickness	0.7-1.2 mm
5	Yield Strength	350 MPa
6	Feed Width	1220 mm
7	Effective width	900 mm
8	Roll Stages	26 Stages
9	Shafts Diameter	ф85 mm
10	Main Motor Power	15 KW
11	Hydraulic Group Power	5.5KW
12	Max. Line Speed Of Roll Former	Approx.15 m/min
13	Electric Standard	According to local voltage

1. Guarantee                                        
     In correct operation and maintenance, the machines are 12 months quality guarantee from time of loading, life guarantee repair; within quality guarantee period, except for failures caused by human error, spare parts will be provided freely; after the quality guarantee period, only charge the cost of the spare parts. Free technical supporting and maintenance consulting in lifetime.         
2. Installation                                        
    If necessary, we can send one technician to your factory to install the machine; you need assist our technician to get the visa and pay for the two-way flight tickets, local accommodation (at least three-star hotel with air condition), food, visa cost. And you need pay 200USD/day for technician extra. The total time will be caculated as per the time that shown on the fright tickets when our technician leaves China and arrives back to China.              
                         
  The downpipe forming machine we produce is customized according to the specific requirements of customers,such as specification and raw materials. The machine is installed and tested before leaving the factory.After receiving the machine, the customer can start production once connect wires and tubes.We randomly send instructions to tell how to operate. Of course, we also have corresponding videos for reference.Technicians Can also be sent to customer factory for guidance and training if necessary.The downpipe roll forming machine also work with elbow bending machine,which make flat pipe to curve according to construction requirement.