1.Product Name:
5tons Automatic Hydraulic PPGI GI coil Decoiler machine 10T Unwinder
2.Working Flow:
1) Discharge the inner axis out of the decoiler, then insert it into the steel coil.
2) Carry the steel coil together with the inner axis to the decoiler, install the axis on the frame of decoiler.
3) Use the hand wheel, to expand the inner axis, make the axis tighten the inner diameter of steel coil.
4) Release the brake of decoiler, make the coil sheet run out.
Technique Parameters of the decoiler
| Main frame |
160mm Channel Steel to weld |
| Steel coil inner diameter |
φ470mm - 530mm; |
| Power of motor |
3kw |
| Control |
plc |
| Max outer coil diameter |
φ1000mm |
| Appearance size |
(Length)1840mmX(Width)1000mmX(Height)1200mm |
| The inner coil diameter |
φ450-550mm |
| Max outer coil diameter |
φ1000mm |
| The max capacity |
5T |
1. Guarantee
In correct operation and maintenance, the machines are 12 months quality guarantee from time of loading, life guarantee repair; within quality guarantee period, except for failures caused by human error, spare parts will be provided freely; after the quality guarantee period, only charge the cost of the spare parts. Free technical supporting and maintenance consulting in lifetime.
2. Installation
If necessary, we can send one technician to your factory to install the machine; you need assist our technician to get the visa and pay for the two-way flight tickets, local accommodation (at least three-star hotel with air condition), food, visa cost. And you need pay 200USD/day for technician extra. The total time will be caculated as per the time that shown on the fright tickets when our technician leaves China and arrives back to China.
The downpipe forming machine we produce is customized according to the specific requirements of customers,such as specification and raw materials. The machine is installed and tested before leaving the factory.After receiving the machine, the customer can start production once connect wires and tubes.We randomly send instructions to tell how to operate. Of course, we also have corresponding videos for reference.Technicians Can also be sent to customer factory for guidance and training if necessary.The downpipe roll forming machine also work with elbow bending machine,which make flat pipe to curve according to construction requirement.
Audited Supplier 
1.Product Name:
){kind=link}