Ridge Cap Roll Forming Machine
312 Ridge Cap Tile Making Machine Zinc Ridge Cap Cold Roll Forming Machine.Ridge Cap roll forming Machine Manufacturer is one most popular type of roll forming machines. It makes different shape of color steel ridge cap sheet, which is used for buildings, factory, supermarket ect. For this machine, it suit coil width is 400mm, thickness range is from 0.3mm to 0.8mm. We adopt guide pin type to make machine frame strong. Usually it can run with the max speed to 8-15m/min, PLC with touch screen operation make the machine simple and easy for usage.
General Parameter
| 1 |
Item |
Parameters |
| 4 |
Thickness |
0.3-0.8mm |
| 5 |
Yield Strength |
350 MPa |
| 6 |
Roller Station |
16 |
| 7 |
Power of pump station |
4KW |
| 8 |
Roll Stages |
26 Stages |
| 9 |
Shafts Diameter |
ф70 mm |
| 10 |
Main Motor Power |
5.5 KW |
| 12 |
Max. Line Speed Of Roll Former |
Approx.8-15 m/min |
| 13 |
Electric Standard |
According to local voltage |
Summary
1. Guarantee
In correct operation and maintenance, the machines are 12 months quality guarantee from time of loading, life guarantee repair; within quality guarantee period, except for failures caused by human error, spare parts will be provided freely; after the quality guarantee period, only charge the cost of the spare parts. Free technical supporting and maintenance consulting in lifetime.
2. Installation
If necessary, we can send one technician to your factory to install the machine; you need assist our technician to get the visa and pay for the two-way flight tickets, local accommodation (at least three-star hotel with air condition), food, visa cost. And you need pay 200USD/day for technician extra. The total time will be caculated as per the time that shown on the fright tickets when our technician leaves China and arrives back to China.
The downpipe forming machine we produce is customized according to the specific requirements of customers,such as specification and raw materials. The machine is installed and tested before leaving the factory.After receiving the machine, the customer can start production once connect wires and tubes.We randomly send instructions to tell how to operate. Of course, we also have corresponding videos for reference.Technicians Can also be sent to customer factory for guidance and training if necessary.The downpipe roll forming machine also work with elbow bending machine,which make flat pipe to curve according to construction requirement.
Audited Supplier 
){kind=link}